System Setup Training Quiz

How should the patient's head be supported when setting up the Ceribell EEG?*
- Use a soft pillow to apply pressure at the back of the headband
- Rollup one large towel or two small towels to support patient’s lower head, to create a space between patient’s head and pillow to prevent pressure from the headband electrodes
- No support is needed for patient’s head as long as patient is lying or sitting comfortably
- None of above

What should be done with a patient's hair when setting up the Ceribell EEG?*
- You cannot use Ceribell EEG headbands on patient with thick hair
- You need to shave the patient’s hair before you apply the Ceribell headband
- You should pull long hair behind the patient’s ears and move the hair bangs out of the way
- None of above

What is the correct position for the headband?*
- The clasp should be centered
- The headband should be right above the eyebrows
- The headband should be right above the ears
- All the above

Can you use the Ceribell headband on patients with head wounds?*
- Yes. No assessment is needed
- Yes. You can position the headband to avoid the wound if needed, but you should include a note and notify the physician so that the physician is aware of how the headband was placed
- Yes. You can put the Ceribell headband on open wounds where brain is exposed as long as the headband fits the patient
- No. Ceribell headband should never be used on a patient with head wounds even when the wounds are not covered by electrodes

What does it mean when the electrodes on the recorder screen are shown in grey?*
- The headband cable is not connected to the recorder properly. You should disconnect the headband from the recorder and re-plug it in
- The connection between the electrodes and scalp is poor. You should rotate the electrodes to prepare the skin
- The recorder is malfunctioning and must be replaced
- The electrodes have malfunctioned. You should use a new headband

What is the correct way to prepare the electrodes?*
- Push the plunger and then rotate the electrodes back and forth 7 times
- While applying gentle pressure, rotate the electrodes back and forth for 7 complete rotations, and then use two thumbs to push the plunger
- It does not matter if you rotate or push down the plunger first
- After 7 rotations, the gel will automatically be dispensed

I rotated one electrode 7 times and deployed the gel, but the electrode light in the recorder remains red. What should I do?*
- You need to prepare at least two adjacent electrodes on each side for the electrode light to turn green. If you only prepare one electrode, it will not turn green
- Continue to prepare all of the other electrodes and check again because it can take a few seconds for the contact between the scalp and electrodes to stabilize
- If you have prepared all of the electrodes and the indicator is still red, rotate the electrodes 5 more times until the light turns green. Use a syringe to administer more gel if necessary
- All the above

How do you know that Ceribell is recording EEG and transmitting data to the cloud portal?*
- The blue LED is on
- The blue LED is blinking
- Both the record and wifi icons are displayed
- As soon as the electrodes are green, the Ceribell recorder automatically starts to record

Select the correct statements about using the Brain Stethoscope feature?*
- You can listen to the “sound of the brain” by using the Brain Stethoscope function to differentiate normal brain activities from seizures
- You can choose to listen to the left or right hemisphere of the brain
- Normal brain sounds like white noise, and seizure sound is distinctive, highly rhythmic, and repetitive
- All the above

What should be done to fix an electrode if the indicator is red?*
- Pause the recording if you are in the middle of a recording before you fix the electrode
- Rotate the electrode 5 more times while gently pushing the electrode towards the head, and then squeeze the plunger further to dispense any remaining electrode gel
- If further rotation does not work, use syringe provided by Ceribell to add more gel to the electrode
- All the above

Which statement about charging the recorder is correct?*
- Keep the Recorder on while charging
- If possible, immediately return the Ceribell recorder to the charging station after patient use
- You cannot charge the Recorder during a patient recording
- All the above

Which of the following statements is correct?*
- The headband can be reused on the same patient within 24 hours
- Ceribell is CT compatible
- Ceribell is MRI compatible
- Moving a patient who is wearing a Ceribell headband will never affect the quality of the Ceribell EEG recording

Ceribell System Setup Training